Your personal drone, always with you
Ultralight and compact drone
Everything for impressions at speed
Precious memories in smooth videos
Everything for creativity, education and entertainment
If you don't know where to start
Professional drones
Professional shooting and stabilization systems
Handheld gimbal for professional cameras
Professional shooting and stabilization systems
Industrial Platforms
For inspections, rescue operations, firefighting
349,00 €
Pocket-Sized DJI Mic 2.
Main features:
Портативная Аудиосистема
Model | DMT02 |
---|---|
Dimensions | 46.06 × 30.96 × 21.83 mm |
Weight | 28 g |
Bluetooth Protocol | BR/EDR |
Wireless Mode | GFSK 1 Mbps and 2 Mbps |
EIRP | <20 dBm |
Operating Frequency | 2.400-2.4835 Mhz |
Battery Type | Li-ion |
Battery Capacity | 360 mAh |
Battery Energy | 1,39 Wh |
Battery Voltage | 3,87 V |
Charging Temperature | 5° to 45° C (41° to 113° F) |
Operating Temperature | -10° to 45° C (14° to 113° F) |
Charging Time | 70 min |
Operating Time | 6 hours* * Tested when both TXs are connected to the RX without recording backup clips internally. RX is connected to a camera via Camera Audio Cable (3.5mm TRS). |
Model | DMR02 |
---|---|
Dimensions | 54.20 × 28.36 × 22.49 mm |
Weight | 28 g |
Bluetooth Protocol | BR/EDR |
Wireless Mode | GFSK 1 Mbps and 2 Mbps |
EIRP | <20 dBm |
Operating Frequency | 2.400-2.4835 MHz |
Battery Type | Li-ion |
Battery Capacity | 360 mAh |
Battery Energy | 1,39 Wh |
Battery Voltage | 3,87 V |
Charging Temperature Range | 5 to 45° C (41° to 113° F) |
Operating Temperature | -10° to 45° C (14° to 113° F) |
Charging Time | 70 min |
Operating Time | 6 hours |
Model | DMC02 |
---|---|
Dimensions | 116 × 41.5 × 59.72 mm |
Weight | 200 g |
Charging Specification | 5 V, 1.5-3 A |
Battery Type | 18650 Li-ion |
Battery Capacity | 3250 mAh |
Battery Energy | 11.7 Wh |
Battery Voltage | 3,6 V |
Charging Temperature | 5 to 45° C (41° to 113° F) |
Operating Temperature | -10° to 45° C (14° to 113° F) |
Charging Time | 2 hours and 40 mins |
Charging Cycles for TX and RX | Approx. two cycles when charging two TXs and one RX at the same time |
Polar Pattern | Omnidirectional |
---|---|
Frequency Response | Low Cut Off: 50 Hz - 20 kHz Low Cut On: 100 Hz - 20 kHz |
Max Sound Pressure Level (SPL) | 120 dB SPL |
Max Input Level (3.5 mm) | -6 dBV (THD < 0.1%) |
Equivalent Noise | 21 dBA |
Monitor Interface Output Power | Max Output 12 mW@1 kHz, 32 Ω |
Max Transmission Distance | 250 m (FCC) 160 m (CE) Measured in an unobstructed outdoor environment free of interference. |
DJI Mic Receiver × 1
DJI Mic Transmitter × 2
DJI Mic Charging Case × 1
DJI Mic Camera Audio Cable (3.5mm TRS) × 1
DJI Mic Mobile Phone Adapter (Type-C) × 1
DJI Mic Mobile Phone Adapter (Lightning) × 1
DJI Mic Windscreen × 2
DJI Mic Clip Magnet × 2
DJI Mic Carrying Pouch × 1
DJI Mic Hot Shoe Adapter × 1
DJI Mic Charging Cable × 1
You can use DJI Mic with a range of devices, including cameras, smartphones (only Lightning and USB-C ports are supported), computers, Osmo Action 3, and Osmo Mobile 6.
DJI Mic is ready to use without activation. Get registered on the official DJI website and you can get a one year warranty extension.
Yes. DJI’s proprietary encryption technology is in place to protect audio transmission.
After powering on, a backup sound track will be recorded in -6dB in case the main track gets distorted due to a sudden increase of source audio volume.
DJI Mic supports two recording modes: Mono and Stereo. Under Stereo mode, audio from the two transmitters can be recorded via separate channels. Under Mono mode, audio will be recorded via one channel.
At room temperature, it takes about 1 hour and 10 minutes to fully charge the transmitters and receiver using the Charging Case. It takes about 2 hours and 40 minutes to fully charge the Charging Case.
Yes.
All magnetic products contain magnets. It is recommended to keep the DJI Mic back clip and clip magnets away from bank cards, pacemakers, RAM chips, and hard discs.
1. DO NOT use when wearing heavy clothes (sweaters, down jackets, etc.). The transmitters could fall off due to lack of magnetism.
2. Use with caution during vigorous exercise, for example, jumping, sprinting etc.
It is recommended to use a 5V/2A charger to charge the transmitters, receiver, and Charging Case. At room temperature, it takes about 1 hour and 10 minutes to fully charge the transmitters and receiver using the Charging Case. It takes about 2 hours and 40 minutes to fully charge the Charging Case.
It is recommended to use the back clip to attach DJI Mic to places like your collar, or you can use the DJI Mic clip magnets.
Note: If you need to put the transmitters on any flat surface, use the magnet in the combo to make them stand upright.
Omni-directional.
1. Download the firmware update package from the official DJI website Download page;
2. Connect the transmitters and receiver to your computer using a standard USB-C cable;
3. Put the downloaded firmware update package (the file with bin as a suffix) under the root directories of the transmitters and receiver;
4. Disconnect from your computer and the transmitters and receiver will start the firmware update automatically;
Note: If an update fails, download and copy the firmware again. Reboot the transmitters and receiver. Repeat until the firmware update is successful.
250 meters with FCC compliance in open environments without interference (160 m under CE).
DJI Mic transmitters and receiver are already linked by default. If you need to link them again, you can do so in the following ways:
Method 1: Put the transmitters and receiver into the Charging Case and they will link automatically;
Method 2: Turn on the receiver and transmitters. Scroll the screen of the receiver downward to enter the control center page. Slide to the left and click “Settings” to enter the settings page. Slide to the left again and click “Link” to enter linking mode. Then, press and hold the link button on the side of the transmitters until the green light on the top left corner flashes and wait for the linking to finish. When the linking indicators of the transmitters turn solid green, it means linking is successful.
To end linking, click “Stop Linking.”
Yes, DJI Mic transmitters support standalone recording. Press the recording button on the side of the transmitters. Solid red light indicates that recording has started. When fully charged, it can record for up to 5.5 hours. With a constant power supply, it can record up to 14 hours of 24-bit lossless audio.
Note: Audio will be saved as one file for every 30 minutes during standalone recording. When internal storage space runs out, new audio will replace the earliest ones, and new files will also be saved every 30 minutes.
You can export the audio by connecting the transmitters to your computer using a standard USB cable.
After linking the transmitters with the receiver, slide the main screen of the receiver upward, click the Mic icon, and you can mute or unmute the transmitters. You can also double press the mute button of the transmitters. The mute indicator will pulse red to show that the transmitters are muted.
No.
DJI Mic transmitters have built-in 8GB storage and do not support external storage.
You need to connect them with your computer and delete them. You can use the receiver for formatting. If the storage space of the DJI Mic transmitters is running out, early recordings will be replaced by new recordings.
No.
No. The transmitters only support the receiver of DJI Mic.
Mount the windscreen into the slots on the transmitters, then press and turn clockwise to tighten.
No. It only supports DJI Mic transmitters.
It can connect with up to two transmitters at the same time.
To connect with a smartphone: Insert a standard phone adapter into the pogo-pin port at the bottom of the transmitters and connect with your phone. Start shooting or recording on your phone and the receiver will start working.
To connect with a camera: The receiver can be mounted on a camera via the hot shoe adapter. Use a 3.5mm camera connection cable to connect the camera mic port and the 3.5mm audio output port on the receiver. Then, start recording videos on your camera and the receiver will start working.
To connect with a PC: Use a standard charging cable to connect DJI Mic with your PC. Then enter the audio input settings page for related settings.
Under M mode, the audio recorded by the two transmitters will be in one channel; under S mode, the audio will be separated into the left and right channels.
If recording is done with two transmitters in M mode, the audio will be placed on 1 channel. And if the recording is performed in S mode, it will be divided into right and left channels.
Link the transmitters and receiver and plug the 3.5mm earphone jack into the 3.5mm monitor port of the DJI Mic receiver and you can begin monitoring. You can also adjust monitoring volume. Slide the main screen of the receiver downward to enter the settings page. Slide to the left and click monitor gain to adjust the volume.
2.4GHz private protocol.
S: Stereo
M: Mono
Ms: Mono with Safety Track on
Note: If you use Safety Track, you need to separate the tracks during post production.
You can lock the receiver screen by pressing the power button for one second and the lock icon will appear on the screen. Press again and you can unlock the screen.
No. However, you can connect your phone with an external Bluetooth device to play back sound.
No.
No.
No.
No account yet?
Create an Account